Water Damage And Mold Restoration – What Is It? It is the process of repairing a house or property to its pre loss condition. Damage to the home could be as a result of an overflow, flood or any other water damage and mold event. The water damage restoration process involves several key procedures like loss assessment, categorization based on the water contamination levels, decontaminating and drying the structure, monitoring of the process and completion of the process. There are 2 large certifying bodies, namely the IICRC (Institute of Inspection, Cleaning and Restoration Certification) as well as the RIA (Restoration Industry Association) that recommends standards for water damage restoration. The S500 damage as a result of water guide is the benchmark tool which is used by companies specializing in restoration of water damage.
Loss Assessment and Categorization – Loss evaluation is the first and the most important part of water damage restoration. The assessment has to be correct so that an appropriate response can be utilized. In restorating the damage caused by water, technicians as well as the insurance providers must work together and know what is damaged and the way to restoring the harm. Identifying the cause of the damage, documentation of damage, and accurate estimates are mandatory to get a proper water damage restoration. Categorization is situated on the contamination amounts of the water source. The categories are highlighted below
Category 1 – This can be water from clean sources like pipes, sinks and toilets without faeces or urine.
Category 2 – This really is water that has some contaminants like water from a dishwasher, washing machine or toilet with urine.
Category 3 – This is water that is highly unsanitary and is capable of doing causing illness or death if ingested. Sewage water, water from toilet with faeces, standing water with microbial growth and floodwater are a handful of examples.
Decontamination and Drying – After the evaluation is done, the process of drying and decontaminating begins at the site. Based on the extent of damage, damage caused as a result of water can be classified into 4 types. Class 1 Damage- When loss is restricted to a small area and much less water continues to be absorbed by materials. This leads to slow evaporation rate. Class 2 Damage – When the damage is always to the complete room and carpet area. Class 3 Damage – If the entire area is saturated with water and Class 4 Damage – when there are numerous deep saturation pockets. Decontamination and drying is actually a key stage in Water damage restoration and equipments like blowers, dehumidifiers, scrubbers and subfloor drying equipments have to be used. Decontamination must be done if contamination has become detected in the region. Decontamination may be performed for the whole area or even in specific pockets where contamination has become detected.
Monitoring and Completion – Monitoring the restoration procedure of damage caused due to damage is essential to achieve the desired results. One must be proactive during the monitoring process. Checking if the drying tools are setup properly, assessing if the personnel involved are qualified for the job and checking if the equipments are in working order inwtsy all area of the monitoring process. Necessary steps should be taken if something wrong is spotted through the monitoring process. The whole procedure of water damage and mold restoration could be considered complete just once the humidity, temperature and also the moisture content is just as per industry standards. Upon completion of water damage restoration process, the drying equipment can be removed.